requested. Nothing is printed in this case. This alert appears when printing if there are no pages in the range you  range. • You selected the page range xxx through yyy. There are no pages in this    from your disk and replace it with a known “good” copy of Disinfectant. notification occurs, you must remove this particular copy of Disinfectant modified. This may mean that it has been infected by a virus. If this Disinfectant checks itself when it starts up and notifies you if it has been  copy. otherwise modified. Please delete this copy and use an original unmodified • This copy of Disinfectant has been damaged, infected by a virus, or    an infected system file at startup. This alert is presented by the Disinfectant protection INIT when it detects  remove the virus. • The System folder is infected by the yyyyy virus. Use Disinfectant to    a MacMag-infected HyperCard stack. This alert is presented by the Disinfectant protection INIT when it detects  Disinfectant to remove the virus. • The stack "xxxxxxxxxx" is infected by the MacMag virus. Use    you to reinsert the disk being scanned. different disk, and save the report on that disk. Disinfectant will then ask single floppy system, you may eject the disk being scanned, insert a cancels the scan without clearing or saving the report. If you have a file, clears the report field, and continues the scan. The Cancel button and Cancel. Save is the default button. It saves the partial report as a text approaches the size limit, you will get this alert, with two buttons, Save never be affected by this limit. If you produce a very long report which Disinfectant has an upper limit for the size of the report. Most people will  • The report is too big. It must be saved before you can continue.    INIT on a locked startup disk. This alert is presented if you try to install the Disinfectant protection  locked. • The protection INIT could not be installed because the startup disk is    page size. square available for printing after taking into account the margins and that are too big. Disinfectant requires that there be at least a 4 inch This alert appears in the “Page Setup” dialog if you specified margins  click on the Cancel button. • The margins you specified are too large. Please make them smaller, or    font size. This alert appears in the “Page Setup” dialog if you enter a ridiculous  click on the Cancel button. • The font size must be in the range 1 through 24. Please correct it or    may then try to save to a different disk. is not enough room on the disk to save the file. Click on the OK button. You This alert appears if you try to save a report or the document and there  • The file could not be saved because the disk is full.    a WDEF-infected disk. This alert is presented by the Disinfectant protection INIT when it detects  to remove the virus. • The disk "xxxxxxxxxx" is infected by the WDEF virus. Use Disinfectant    some other disk. There is no Cancel button in this case. case, you can either unlock and reinsert the original disk or you can insert “scanning station” option is checked in the preferences window. In this This second form of the unlock alert is used only when the special  reinsert the disk or insert the next disk to be repaired. • The disk cannot be repaired because it is locked. Please unlock and    operation and return to Disinfectant. reinsert it. You can use the Cancel button in the alert to cancel the automatically begin scanning and repairing the disk as soon as you and puts up this alert. Unlock and reinsert the disk. Disinfectant will If you try to disinfect a locked floppy disk, Disinfectant ejects the disk  reinsert the disk. • The disk cannot be repaired because it is locked. Please unlock and    on the “Cancel” button to return to Disinfectant. command. Click on the “Restart” button to restart your Macintosh. Click This alert is presented when you select the “Install Protection INIT”  your Macintosh to activate the INIT. • The Disinfectant protection INIT has been installed. You must restart    an infected application. This alert is presented by the Disinfectant protection INIT when it detects  Disinfectant to remove the virus. • The application “xxxxxxxxxx” is infected by the yyyyy virus. Use    button returns to Disinfectant. then quits. The No button quits without saving the report. The Cancel lets you choose the location of the saved report, saves the report, and three buttons—Yes, No, and Cancel. The Yes button presents a dialog that messages for infected files. If it does, this alert is presented. There are When you quit Disinfectant, it checks to see if the report contains any  • Save report before quitting?    saving the report. The Cancel button returns to Disinfectant. saves the report, and then clears the report. The No button clears without presents a dialog that lets you choose the location of the saved report, presented. There are three buttons—Yes, No, and Cancel. The Yes button contains any messages for infected files. If it does, this alert is When you clear the report, Disinfectant checks to see if the report  • Save report before clearing?    the “Yes” button to delete the old file and replace it by the new one. exists. Click on the “No” button to abort the file save operation. Click on install or extract the protection INIT if a file with the same name already This alert is presented when you save a document or report or when you  • Replace existing “xxxxxxxxxx”?    This informative message is displayed during printing.  • Printing “xxxxx.” Press Command-Period to cancel printing.    reported in the message. Click on the OK button to return to Disinfectant. you would send a note to the author. Please specify the error number number. This alert should not occur. If it does, we would appreciate it if An unexpected error occurred during printing. “nnnn” is the error  • Printing error (error code = nnnn).    printer. Use the Chooser desk accessory to select a printer. This alert occurs if you try to print when there is no currently selected  • Printing error - you must use the Chooser to select a printer.    and try printing again. Unlock the startup disk, or create an unlocked copy of your startup disk, This alert occurs is printing fails because the startup disk is locked.  • Printing error - the startup disk is locked.    disk, then try printing again. complete a printing operation. Try to make more room on your startup This alert occurs if there is not enough room on your startup disk to  • Printing error - the startup disk is full.    same folder as your System file. Imagewriter, you must have the system file named “Imagewriter” in the printer driver has not been properly installed. For example, to print on an This alert occurs if you try to print a report or the document and the  • Printing error - could not locate printer driver in System folder.    integrity checksum. floppy disk or other ejectable disk while Disinfectant completes its initial This message is also displayed when you startup Disinfectant from a  some time, so you should be patient. information from the disk that it might need later. This can take quite and/or the System file. Before ejecting the disk, Disinfectant loads all the This message is displayed if you eject the disk containing Disinfectant  • Please wait…    occur. When you click on the OK button, Disinfectant quits. This alert is presented if Disinfectant runs out of memory. It should not  • Out of memory.    When you click on the OK button, Disinfectant quits to the Finder. file system. If you try running it without HFS, it will present this alert. On unenhanced Mac 512K models, Disinfectant requires the hierarchical  20” on your startup disk. the 64K ROMs, this means that you need to include the file “Hard Disk • Disinfectant requires the hierarchical file system (HFS). On Macs with    button, Disinfectant quits to the Finder. on an earlier system, it will present this alert. When you click on the OK Disinfectant requires System 3.2 or later. If you try running Disinfectant  • Disinfectant requires System 3.2 or later.    window. alert” option in the “Notification options” section of the preferences discovery of an infected file and you have selected the “Also display MultiFinder and it requires your attention for some reason other than the This alert is presented if Disinfectant is running in the background under  • Disinfectant requires attention.    mistake. and you click on the “Denied” button instead of the “Granted” button by You may also get this alert if you are using the regular version of Vaccine  is a special version that was prepared just for the University of Michigan. The version of Vaccine mentioned in the alert is not the normal Vaccine. It  canceled and the Disinfect button is disabled. presents this alert. When you click on the OK button, the current scan is applications. If Disinfectant detects such a virus prevention tool, it that it is impossible for Disinfectant to properly repair infected Some virus prevention tools can interfere with Disinfectant in such a way  repair infected files. to check for viruses, but you will not be able to use the Disinfect button to using Disinfectant to repair files. You may use Disinfectant on this system must remove this version of Vaccine from your System folder before special University of Michigan version of Vaccine (Vaccine.UofM). You Disinfectant privileges. Another possible reason is that you are using the reason is that you are using GateKeeper and you forgot to grant • Disinfectant is unable to repair files on this system. One possible    preferences window. display alert” option in the “Notification options” section of the in the background under MultiFinder and you have selected the “Also This alert is presented if Disinfectant finds an infected file while running  • Disinfectant has found an infected file.    would appreciate it if you would notify the author. should not happen. If it does, it might be an error in Disinfectant and we while trying to save a document, report, or the protection INIT. This alert This alert is presented if Disinfectant encounters an unexpected error  • An unexpected error (nnn) occurred while trying to save a file.    Disinfectant. button to return to Disinfectant. Click on the Quit button to quit Click on the Restart button to restart your Macintosh. Click on the Cancel  were found, this alert is presented. infected files were found in the currently active System folder. If any When you quit after a disinfection run, Disinfectant checks to see if any  Macintosh using a locked virus tools floppy and run Disinfectant again. have or could become reinfected. You should immediately restart your • A virus may still be active in memory, and some of your files may   alphabetical order, with a brief explanation of each one. This section presents all of Disinfectant’s alerts and dialogs, in   åAlerts & Dialogs 4 4  ˇˇ